PE Film Recycle Washing Machine
800kg/hr PE post-consumer or post-agriculture film washing plant
PE bail package film recycling plant/plastic recycle washing & granulating machine/plastic recycling machine

Product Feature:
1.Plastic film cutting, washing, recycling machine with high output and excellent clean ability 

2.Whole plastic recycling line is used to crush, wash, dewater and dry the PP/PE film, PP woven bag

3.Simple structure, easy operation, large capacity, energy-saving, safety

4. Automatic controlling, compacted structure, excellent production ability, perfect clean ability

5. Space saving with reasonable design 

PURUI Recycling Machine Process Material :

Washing line can be used for PP woven bag, film and PE trash bag, film, packing material and some other loose material, agriculture film (1mm), industrial LDPE film with milk and powder, LDPE green- house film. Food packaging film, agriculture film, green house using film, film used in oil field, PP bag, PE film, woven bag, LDPE shrink film, nature film or heavy printed film, cement bag, oily bag, dirty bag

Machine working process:

Hydraulic shear-belt conveyor-roll drum--belt conveyor-crusher-horizontal friction washer--high speed friction washer-floating tank-spiral feeder-NG320 squeezer & agglomerator 

Cutting Unit 
Hydraulic shear

Pre-washing unit 

Roll Drum 

High speed  friction washing system (to remove oil with firction force)

Washing Unit 

Plastic floating tank (film will spread into the tank 

Drying Unit 

NG 320 Squeezing drying system ( to dry the film scrap within 5% water content

Main equipment
Cutting Unit Hydraulic shear
To pre-crush the bail film/ film block into long scrap 
Plastic Granulator/crusher 
to further cut the long waste scrap into small scrap 
Wet crusher have 3 advantages
To protect the cutters from bearing 
Low noise with little dust 

Crusher can be equipped with operating plate
Easily operated with sharp cutters
PrewashingFriction washer 
with much sticky waste or paper label on film, to use the friction forces among material for further removing waste or paper label
el /Roll Drumer
with roll drum fast rotating, the big waste, like branch or stones will be filter by roll drum hole.
The filtered big waste will transfer out by bottom belt conveyor.
Washing and separatingFloating tank 
 Wash and separate the materials by material gravity and water gravity
stainless steel conveyor can save large amount of water
discharge material can be used side screw or air opening valves for waste discharge 
The inner thrumbwheel can be used bucket type( round) or claw type
           DewateringHorizontal Centrifugal Dryer 
 This machine is mainly used to dewatering the cleaning plastic film, centrifugal forces from high speed rotation for master shaft which throw plastic film and water against the screen, and water is drained from the screen. This machine is good effective on drying and high efficiency.
NG 320 Squeezer and agglomerator 
inner structure:
one huge conical screw embed in the squeezer. with screw rotating, material will be push and compress. at this time, the water go out from the outside filter. after that, with the heat from waste material friction, material will be heated into semi-melting. after that, through the die/mould, mterial will be compressed with high temperature. after that, material go through pelletizing system, and output the rigid scrap. 
This machine is less energy consumption and good drying performance, moisture content of the output material can be controlled between 3% to 5%. 

Equipment characteristic
Capacity 300-2000 kg/h
Applicationfood packaging film, agriculture film, green house using film used in oil field, PP bag, PE film, woven bag, LDPE shrink film or heavy printed film, cement bag, oily bag, dirty bag
Specification Plastic Shredder/ Plastic CrusherHigh Speed Friction Washer, Centrifugal Dewatering Washer, Spiral Feeder, Floating Tank, Spiral Feeder , Two Main Shafts Rotting Tank,Squeezer or Squeezer & Agglomerator. 
Easily operated with power saving
Output Typecrushing, washing, dewatering, drying,granulating and packaging  The humidity of final output could be within 5%-10%.
Material will be processed by crushing, washing, dewatering, squeezing & aggregating. The humidity of final output could be within 2%.
After-sales ServiceEngineers avaliable aboard installation

5. Additional information:
  • Floating, washing tank can be changed as per customer's needs
  • Machine component like shredder, crusher also add as per customer's needs
  • Washing line size can be prolonged and short as the process material dirty content like oil, sand, ink
  • Now, wiring dryer or screw dryer are available, dryer system is also according to the processing material thickness
  • In general, up 50 microns, wiring fried 
Product Search