From shredding compactor, the material is transported directly into the extruder by a belt conveyor without being precut or compressed. The rate of material feeding is controlled automatically by the current of the extruder motor and main extruder screw rotating speed. This design will keep material with balance feeding, and protect material from blocking and melting in the shredding compactor.

Degassing parts: natural degassing/ vacuum degassing

Melting plastic is filtered by a continuous melt filter (plate hydraulic screen filter, double volume screen changer) available with or without back-flushing system. According to material type, the pelletizing way can be equipped with a water ring, strand or underwater pelletizing system.

Main Technical Parameter
Normal

Model	ML75	ML85	ML100	ML130	ML160	ML180
Screw diameter(mm)	75	85	100	130	160	180
L/D	26 to 33
Output(kg/h)	100-120	100-180	200-300	400-600	600-800	800-1000

Advanced (high efficiency with power saving)

Model	ML75B	ML85B	ML100B	ML130B	ML160B	ML180B
Screw diameter(mm)	75	85	100	130	160	180
L/D	26 to 37
Output(kg/h)	100-150	200-350	400 to 550	600 to 800	800 to 1000	1000-1200