Twin-screw granulation machine maintenance knowledge
Familiar with maintenance knowledge twin-screw granulator, to ensure the normal operation and extend the life of mechanical prerequisite when coupled with the proper operation and use, so let's first look at together should have knowledge of those twin-screw granulator bar ! 1, using 500 hours after the extruder, gear box gear grinding down the iron will or other impurities, therefore, should be cleaned at the same time to replace the gear box gear lubricants. 2, twin-screw granulator after a period of time to do a comprehensive inspection, checking the tightness of all the screws. 3, found instruments, steering pointer full-scale, you should check thermocouple sideline contact is good. 4, the case of the production of power, the main drive and the heating is stopped, when the power is restored, the barrel must be reheated to the provisions of paragraphs temperature and heat extruder can only start after a period of time.
Second, routine maintenance twin screw granulation machine: a screw only allowed to start at a low speed, idle time is not more than three minutes. 2, does not allow the material debris, non-metal and gravel and other hard objects into the hopper and extruder. 3, have enough warm-up time, before driving the car manual tray should be brisk. Should the thermostat to reach the set temperature after the general two hours. 4, when the barrel cover or suction cover is open, to prevent foreign matter falling into the host.
Second, routine maintenance twin screw granulation machine: a screw only allowed to start at a low speed, idle time is not more than three minutes. 2, does not allow the material debris, non-metal and gravel and other hard objects into the hopper and extruder. 3, have enough warm-up time, before driving the car manual tray should be brisk. Should the thermostat to reach the set temperature after the general two hours. 4, when the barrel cover or suction cover is open, to prevent foreign matter falling into the host.
Category
Search
